Lab planetary mixer
Sower 2L laboratory planetary mixer is vacuum sealed. The mixer body can be heated by electricity, steam, water and oil circulation. The transmission shaft has a unique temperature detection device. The mixer internal wall is finished to ensure the function of the scraper (completely scrape off the materials from the internal wall)
1. Electric lifting bucket type
2. Single dispersing axle + single stirring axle + scraping wall.
Rotary stirring system:
1. Power of revolution/stirring motor: 0.75kw /4P; Matching cycloid gear reducer, frequency converter
2. Planetary revolution speed: 0~52rpm, adjustable.
3. Mixing shaft/mixing slurry speed: 0~78pm, adjustable.
4. Selection of mixing slurry: spiral twist type (customized according to material characteristics), SUS304 material; Quantity: 2
5. Wall scraper: quantity: 1 set; Scraping wall material: SUS304 and Teflon; Consistent with the speed of revolution
Autobiography decentralized system:
1. 0.75kw /2P dispersion motor and frequency converter:
2. Dispersion speed (rotation) : speed: 0~ 2,650 RPM, adjustable
3. One dispersing shaft and two dispersing disks shall be installed to ensure better dispersing/stirring
4, scattered disk Φ 38 mm in diameter, Material SUS304 stainless steel
1. Design volume of stirring barrel: 3.6l; Effective volume: 2L;
2. Inner bladder material: SUS304;
3. The upper flange plane of the stirring barrel and the upper barrel body are sealed through the sealing ring;
4. A pair of lifting hands.
5. Double layer with insulation layer, the charged heating rod inside the jacket can heat the material
6. Within the clip, the coil tube can be connected with the cooling medium for material cooling (this function can be selected according to the customer's requirements)
7, on the barrel on match Φ 40 powder/liquid feed hopper, a, can quickly switch; 1 spotlights; With 2 small Windows (one spotlights and one viewport), and other necessary nozzles
Electronic control system:
Power distribution cabinet: frequency control, temperature display (control), spotlights, lifting, emergency stop and other functions of the equipment are displayed and operated on the power distribution cabinet.
1. With positioning adjusting device and locking device, the stirring barrel and upper barrel can be accurately positioned and rotation can be prevented.
2. The positioning stop of the flange under the upper barrel body should be precisely matched with the mixing tank to ensure the reasonable position of the mixing tank and accurate positioning.
1. Equipped with vacuum pump and buffer tank, and mechanical seal, vacuum the cylinder
1) Revolution / mixing motor power: 0.75kw/4p; Supporting cycloidal pin gear reducer and inverter
2) Planetary revolution speed: 0 ~ 52rpm, adjustable.
3) Mixing shaft speed: 0 ~ 78pm, adjustable.
4) Selection of agitator form: spiral twist type (customized according to material characteristics), material SUS304; Quantity: 2
5) Scraper: quantity: 1 group; Scraping material: SUS304 and Teflon; Consistent with revolution speed
It is widely applied in putties, fillers, plasters, pastes, adhesive, silica gel, sealant materials, electronic chemicals, lithium battery slurry etc.
Add.：RM2110 Unicom Tower, 547 West Tianmu Road, Jing 'An District, Shanghai
Phone：+86 21 6317 1155
Fax：+86 21 6317 8868
When communicating with us, Shanghai SOWER will serve you wholeheartedly
Add.：2110 Unicom International Building, 547 Tianmu West Road, Jing 'an District, Shanghai
Tel：+86 21 6317 1155
Fax：+86 21 6317 8868
WeChat official account
Or search for
More wonderful waiting for you!
Copyright ? 2021 Sower dimensional mechanical and electrical equipment co.,ltd. All Rights Reserved. 滬ICP備05009800號-1